Company name: zhengzhou hengfeng abrasive tools co., LTD
Contact person: manager Chen
E-mail: 1099564586 @qq.com
Address: no.166, qinling road, zhengzhou, henan, China
In the production process, the emery wheel should be used to grind on the belt. Generally, the grinding wheel shall be removed and cleaned after 5-7 days of operation. (it is hard to clean because it is covered with polished rubber particles that stick tightly to the emery surface after high temperature friction.)
Now we use acetone soak 2 hours, and then use imported cleaning agent cleaning, the effect is very good, but not environmental protection, not energy saving.
1, to environmental protection, without ketone, can not be halogenated hydrocarbon.
2. Do not damage the emery wheel disc
The installation must be
The grinding wheel disc must be carefully checked and identified before installation. The steps of inspection and identification are as follows:
1. Check whether the grinding wheel's brand is correct and whether it conforms to the performance, shape and size of all selected grinding wheels.
2. Check and identify the appearance and structure of the grinding wheel. Visually inspect the grinding wheel for damage (or cracks). Grinding wheels with external damage (or cracks) will not be used. In addition, the two ends of the grinding wheel are required to be smooth without obvious skew.
3. Check and identify internal cracks of the grinding wheel disc. Hold the grinding wheel in hand, and tap the grinding wheel with a wooden hammer to hear the sound. The grinding wheel without cracks will make a clear sound, while the cracked grinding wheel will make a hoarse sound, so it cannot be used.